Chrysler PT Cruiser 2001 Service Manual Supplement page 1066

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 15 Heat Shield—Catalytic Converter
1 – HEAT SHIELD
2 – NUT
Fig. 16 Heat Shield—Intermediate Pipe
1 – SCREW
2 – HEAT SHIELD
3 – NUT
4 – SCREW
Fig. 17 Heat Shield—Muffler
1 – HEAT SHIELD
2 – FASTENER
INSTALLATION
(1) Position heat shield(s) to underbody.
(2) Install heat shield fasteners (Fig. 14), (Fig. 15),
(Fig. 16), or (Fig. 17).
(3) Inspect heat shield to exhaust system clear-
ances and adjust as necessary. Refer to ADJUST-
MENTS - Exhaust System Alignment for procedure.
(4) Lower vehicle.
EXHAUST SYSTEM 11 - 9