Chrysler PT Cruiser 2001 Service Manual Supplement page 1362

PT
DISASSEMBLY AND ASSEMBLY (Continued)
(1) Install transaxle solenoid pack and new gasket
(Fig. 386).
Fig. 386 Install Solenoid Pack
1 – SOLENOID/PRESSURE SWITCH ASSEMBLY
2 – GASKET
(2) Install and tighten solenoid/pressure switch
assembly-to-transaxle case bolts to 12 N·m (110 in.)
lbs.) torque (Fig. 387).
Fig. 387 Solenoid/Pressure Switch Assembly-to-
Case Mounting Bolts
1 – BOLTS
2 – SOLENOID AND PRESSURE SWITCH ASSEMBLY
DIFFERENTIAL REPAIR
NOTE: The differential is serviced as an assembly.
The only parts that are serviceable within the differ-
ential are the differential bearing cups and cones. If
any other part fails within the differential, you must
replace the differential assembly along with the
transfer shaft.
DISASSEMBLY
The transfer shaft should be removed for differen-
tial repair and bearing turning torque checking.
(1) Remove the differential cover and bolts (Fig.
388) (Fig. 389).
Fig. 388 Differential Cover Bolts
1 – DIFFERENTIAL COVER BOLTS
2 – DIFFERENTIAL COVER
Fig. 389 Remove Differential Cover
1 – DIFFERENTIAL ASSEMBLY
2 – DIFFERENTIAL COVER
TRANSAXLE 21 - 177