Chrysler PT Cruiser 2001 Service Manual Supplement page 1331

21 - 146 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
(8) Install UD piston return spring and Tool 5067
as shown in (Fig. 278).
Fig. 278 Seal Compressor Special Tool 5067
1 – PISTON RETURN SPRING
2 – SPECIAL TOOL 5067
3 – INPUT SHAFT CLUTCHES RETAINER ASSEMBLY
(9) Using Tool 5059A and an arbor press, Install
the UD spring retainer and snap ring. (Fig. 279) (Fig.
280) Compress just enough to install snap ring.
CAUTION: Compress return spring just enough to
install snap ring.
Fig. 279 UD Return Spring and Retainer
1 – UNDERDRIVE SPRING RETAINER
2 – SNAP RING
3 – SEAL
4 – PISTON RETURN SPRING
Fig. 280 Install UD Spring Retainer and Snap Ring
1 – ARBOR PRESS RAM
2 – SNAP RING PLIERS
3 – SNAP RING
4 – OD/REVERSE PISTON
5 – TOOL 5067
6 – TOOL 5059A
(10) Install the UD clutch pack (four frictions/four
steels) (Fig. 281).
Fig. 281 Underdrive Clutch Pack
1 – CLUTCH PLATE
2 – ONE UD CLUTCH DISC
3 – CLUTCH DISC
PT