Chrysler PT Cruiser 2001 Service Manual Supplement page 1329

21 - 144 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
ASSEMBLY
Use petrolatum on all seals to ease assembly of
components.
(1) Using an arbor press, install input shaft to
input shaft hub (Fig. 270).
Fig. 270 Install Input Shaft
1 – INPUT SHAFT
2 – ARBOR PRESS RAM
3 – INPUT SHAFT HUB ASSEMBLY
(2) Install input shaft snap ring (Fig. 271).
Fig. 271 Install Input Shaft Snap Ring
1 – INPUT SHAFT
2 – SCREWDRIVER (DO NOT SCRATCH BEARING SURFACE)
3 – SNAP RING
4 – O-RINGS
5 – SEALS
(3) Using an arbor press and Tool 6057, Install
OD/Reverse piston return spring and snap ring (Fig.
272) (Fig. 273).
Fig. 272 Return Spring and Snap Ring
1 – OD/REVERSE PISTON
2 – RETURN SPRING
3 – SNAP RING
4 – O-RING
Fig. 273 Install Snap Ring
1 – ARBOR PRESS RAM (COMPRESS RETURN SPRING JUST
ENOUGH TO REMOVE OR INSTALL SNAP RING)
2 – SCREWDRIVER
3 – SNAP RING
4 – SPECIAL TOOL 6057
5 – OD/REVERSE PISTON
6 – RETURN SPRING
PT