Chrysler PT Cruiser 2001 Service Manual Supplement page 1460

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 45 Rear Door Latch
1 - Rear Door Power Lock Actuator to Latch Link
2 - Rear Door Outside Handle to Latch Link
3 - Rear Door Lock Latch
4 - Rear Door Inside Rod to Latch Link and Sleeve
5 - Rear Door Bellcrank to Latch Link and Sleeve
REAR DOOR LATCH STRIKER
REMOVAL
(1) Mark outline of door latch striker on B-pillar to
aid installation (Fig. 46).
(2) Remove screws attaching door latch striker to
B-pillar.
(3) Remove door latch striker from vehicle.
INSTALLATION
(1) Install door latch striker from vehicle (Fig. 46).
(2) Install screws attaching door latch striker to
B-pillar.
(3) Align marked outline of door latch striker on
B-pillar to aid installation.
REAR DOOR GLASS
REMOVAL
(1) Remove door trim panel and inner belt weath-
erstrip.
(2) Lower the window to 50 mm (2 ins.) from bot-
tom of travel.
(3) Loosen bolts attaching rear lower run channel
to inner door panel (Fig. 47).
(4) Remove rear run channels from door.
(5) Loosen screws attaching window regulator to
glass.
Fig. 46 Rear Door Latch Striker
1 - C-Pillar
2 - Spacer
3 - Rear Door Striker
(6) Remove glass.
(7) Lift door glass upward out of the opening at
the top of door.
Fig. 47 Rear Door Glass
1 - REAR DOOR WINDOW GLASS
2 - REAR DOOR
3 - REAR DOOR WINDOW POWER REGULATOR
INSTALLATION
(1) Lower door glass through opening in top of door
and into position in the window regulator (Fig. 47).
BODY 23 - 51