Chrysler PT Cruiser 2001 Service Manual Supplement page 1875

POWER DOOR LOCKS/RKE
*DRIVER DOOR FAILS TO LOCK & UNLOCK —
TEST
4 Remove the inner door trim panel to gain access to the Door Lock Motor connector.
Disconnect the Door Lock Motor connector.
Disconnect the Remote Keyless Entry module connector.
Measure the resistance of the Driver Door Unlock Driver wire between the RKE
connector and the door lock motor connector.
Is the resistance below 5.0 ohms?
Yes → Test Complete.
→ Repair the open Driver Door Unlock Driver wire.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Continued
226
APPLICABILITY
All