Chrysler PT Cruiser 2001 Service Manual Supplement page 1472

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 69 Front Shoulder Belt Adjuster
1 – FRONT SHOULDER BELT ADJUSTER
2 – TAB IS ON BOTTOM
REAR SEAT BELT BUCKLE
REMOVAL
(1) Remove rear seat belt buckle fastener.
(2) Remove rear seat belt buckle from vehicle.
INSTALLATION
(1) Place seat belt buckle into position.
(2) Install rear seat belt buckle. Tighten the seat
belt fastener to 40 N·m (30 ft. lbs.) torque.
REAR SEAT BELT RETRACTOR
REMOVAL
(1) Remove seat belt bezel from seat frame.
(2) Remove bolt and bezel attaching seat belt to
seat frame.
INSTALLATION
(1) Place rear seat belt retractor position.
(2) Install bolt attaching retractor to rear seat
frame. Tighten the seat belt bolt to 40 N·m (30 ft.
lbs.) torque.
CHILD TETHER ANCHOR BEZEL
REMOVAL
(1) Lay rear seat back down (Fig. 70).
(2) Remove screws attaching Child Tether anchor
bezel.
Fig. 70 Child Tether Anchor Bezel
1 - REAR SEAT BACK
2 - CHILD TETHER ANCHOR BEZEL
INSTALLATION
(1) Place Child Tether anchor bezel in position
(Fig. 70).
(2) Install screws attaching bezels.
CARPET
REMOVAL
(1) Remove front seats.
(2) Remove rear seats from vehicle (Fig. 71)
(3) Remove door sill trim covers.
(4) Remove cowl trim covers.
(5) Remove center floor console.
(6) Remove rear seat pivot bezels and striker
bezel.
(7) Remove lower fasteners from B-pillar trim
panel.
(8) Pull carpet from behind trim panel.
(9) Fold carpet in half toward rear seat.
(10) Remove carpet through rear door opening.
BODY 23 - 63