Chrysler PT Cruiser 2001 Service Manual Supplement page 1210

PT
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 78 Reverse Brake Needle Bearing
1 – REVERSE BRAKE NEEDLE BEARING
Fig. 79 Reverse Brake Race
1 – REVERSE BRAKE RACE
Fig. 80 Shift Blocker Removal
1 – 6785 BENCH FIXTURE
2 – SHIFT BLOCKER ASSEMBLY
(22) Remove the 1-2 shift fork from the output
shaft (Fig. 81).
Fig. 81 1–2 Shift Fork Removal
1 – 6785 BENCH FIXTURE
2 – 1–2 SHIFT FORK
(23) Remove input and output shaft assemblies
from bench fixture (Fig. 82).
Fig. 82 Gear Train Removal
1 – 6785 BENCH FIXTURE
2 – INPUT AND OUTPUT SHAFTS
CAUTION: The output shaft assembly is serviced
as an assembly. Do not try to repair any component
on the output shaft. If the 1-2 synchronizer or gear
fails, it is necessary to replace the complete output
shaft assembly.
ASSEMBLY
The sealant used to seal the transaxle case halves
is Mopar Gasket Maker, Loctite 518, or equivalent.
The sealant used for the bearing end plate cover is
Mopar RTV.
TRANSAXLE 21 - 25