Chrysler PT Cruiser 2001 Service Manual Supplement page 1275

21 - 90 TRANSAXLE
REMOVAL AND INSTALLATION (Continued)
(3) Remove the battery hold down clamp and
remove the battery (Fig. 69).
Fig. 69 Battery Removal/Installation
1 – BATTERY
(4) Remove the battery tray (Fig. 70).
Fig. 70 Battery Tray Removal/Installation
1 – BATTERY TRAY
(5) Disconnect and remove the input speed sensor
(Fig. 71).
Fig. 71 Input Speed Sensor
1 – INPUT (TURBINE) SPEED SENSOR
(6) Disconnect the transmission oil cooler lines.
Cap off hoses and fittings to prevent foreign matter
intrusion.
(7) Disconnect the solenoid/pressure switch assem-
bly connector.
(8) Remove the three solenoid/pressure switch
assembly-to-transaxle case bolts (Fig. 72).
Fig. 72 Attaching Bolts
1 – BOLTS
2 – SOLENOID AND PRESSURE SWITCH ASSEMBLY
(9) Remove solenoid/pressure switch assembly and
gasket (Fig. 73).
CAUTION: Be sure to keep foreign material from
entering ports in transaxle case. Erratic transaxle
operation and/or failure can result.
PT