Chrysler PT Cruiser 2001 Service Manual Supplement page 1327

21 - 142 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
(21) Remove input hub tapered snap ring (Fig.
262).
Fig. 262 Input Hub Tapered Snap Ring
1 – INPUT SHAFT
2 – INPUT HUB SNAP RING (TAPERED SIDE UP WITH TABS IN
CAVITY)
3 – SNAP RING PLIERS
(22) Tap on input hub with soft faced hammer and
separate input hub from OD/Reverse piston and
clutch retainer (Fig. 263) (Fig. 264).
Fig. 263 Tap on Input Hub
1 – INPUT SHAFT AND HUB ASSEMBLY
2 – PLASTIC HAMMER
Fig. 264 Input Hub Removed
1 – INPUT SHAFT AND HUB ASSEMBLY
2 – INPUT CLUTCHES RETAINER
3 – O-RING
4 – SEAL
5 – OVERDRIVE/REVERSE PISTON
(23) Separate clutch retainer from OD/Reverse pis-
ton (Fig. 265).
Fig. 265 Pull Retainer from Piston
1 – OVERDRIVE/REVERSE PISTON
2 – INPUT CLUTCHES RETAINER
PT