Chrysler PT Cruiser 2001 Service Manual Supplement page 1282

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 94 Battery Tray Removal/Installation
1 – BATTERY TRAY
Fig. 95 Output Speed Sensor
1 – OUTPUT SPEED SENSOR
TRANSMISSION CONTROL MODULE
REMOVAL
NOTE: If the TCM is being replaced with a NEW or
replacement unit, the Quick Learn AND Pinion Fac-
tor procedures must be performed. Refer to Service
Procedures for proper procedures.
Fig. 96 O-ring Location
1 – OUTPUT SPEED SENSOR
2 – O-RING
(1) Disconnect battery negative cable.
(2) Raise vehicle on hoist.
(3) Remove left front wheel/tire assembly (Fig. 97).
Fig. 97 Wheel/Tire Removal/Installation
1 – LUG NUT
2 – WHEEL/TIRE
(4) Remove wheel house splash shield.
(5) Remove TCM 60-way connector.
(6) Remove three TCM bracket-to-body mounting
screws (Fig. 98).
(7) Remove TCM from bracket (Fig. 98).
TRANSAXLE 21 - 97