Chrysler PT Cruiser 2001 Service Manual Supplement page 1458

PT
REMOVAL AND INSTALLATION (Continued)
1 - REAR DOOR
2 - REAR DOOR TRIM PANEL
3 - REAR DOOR REAR EDGE
REAR DOOR WATER DAM
REMOVAL
(1) Remove door trim panel.
(2) Remove door speaker, if equipped (Fig. 43).
(3) Remove door trim pull cup mount bracket.
(4) Disconnect clip attaching lock linkage to lock
button bell-crank.
1 - REAR DOOR
2 - REAR DOOR WATER DAM
3 - REAR DOOR ARMREST TO INNER PANEL ATTACHING BRACKET
Fig. 42 Rear Door Trim Panel
4 - REAR DOOR FLAG TRIM
5 - REAR DOOR REMOTE HANDLE/BEZEL ASSEMBLY
6 - REAR DOOR LATCH LINK AND SLEEVE
(5) Peel water dam away from adhesive around
perimeter of inner door panel.
INSTALLATION
(1) Insure
securely retain the water dam. Replace as necessary.
(2) Place the water dam into position and press
securely to adhesive making sure to properly route
wiring and linkages (Fig. 43).
Fig. 43 Water Dam
BODY
that enough adhesive
23 - 49
remains to