Instrument Cluster Descriptions; Instrument Cluster Display; Instrument Cluster Display Location And Controls - Jeep Gladiator 2024 Owner's Manual

100 GETTING TO KNOW YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER
DESCRIPTIONS
1. Tachometer
○
Indicates the engine speed in revolutions per
minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer
pointer in the red area. Engine damage will occur.
2. Temperature Gauge
○
The temperature gauge shows engine coolant
temperature. Any reading within the normal
range indicates that the engine cooling system
is operating satisfactorily.
○
The gauge pointer will likely indicate a higher
temperature when driving in hot weather, up
mountain grades, or when towing a trailer. It
should not be allowed to exceed the upper lim-
its of the normal operating range.
WARNING!
A hot engine cooling system is dangerous. You or oth-
ers could be badly burned by steam or boiling cool-
ant. It is recommended that you call an authorized
dealer for service if your vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could dam-
age your vehicle. If the temperature gauge reads "H"
pull over and stop the vehicle. Idle the vehicle with
the air conditioner turned off until the pointer drops
back into the normal range. If the pointer remains on
the "H", turn the engine off immediately and call an
authorized dealer for service.

3. Instrument Cluster Display

○
The instrument cluster display features a driver
interactive display page 98.
4. Fuel Gauge
○
The pointer shows the level of fuel in the fuel
tank when the ignition switch is in the ON/RUN
position.
○
The fuel pump symbol points to the
side of the vehicle where the fuel
filler door is located page 150.
5. Speedometer
○
Indicates vehicle speed.
INSTRUMENT CLUSTER DISPLAY
Your vehicle will be equipped with an instrument cluster
display, which offers useful information to the driver.
With the ignition in the OFF mode, opening/closing of a
door will activate the display for viewing, and display the
total miles (kilometers) in the odometer. Your instru-
ment cluster display is designed to display important
information about your vehicle's systems and features.
The driver interactive display, located in the instrument
panel, indicates how systems are operating and gives
you warnings when a system, or systems, needs your
attention. The steering wheel mounted controls allow
you to scroll through and enter the main menus and
submenus. You can access the specific information you
want to make selections and adjustments.
INSTRUMENT CLUSTER DISPLAY
LOCATION AND CONTROLS
The Instrument Cluster Display is located in the center
of the instrument cluster. The display contains different
areas of vehicle information.
Instrument Cluster Display Location
1 — Instrument Cluster Display Screen
2 — Instrument Cluster Display Controls
•
The top line where Reconfigurable Telltales, Com-
pass Direction, Outside Temperature, Time, Range,
Audio Info, MPG or Trip are displayed. This also dis-
plays the Speedometer which is an option for the
upper center reconfigurable, but is not the default.
Default setting is Menu Title.