Instrument Cluster Descriptions - Jeep GLADIATOR 2023 Owner's Manual

110 GETTING TO KNOW YOUR INSTRUMENT PANEL
Use this QR code to access your digital
experience.
I C
NSTRUMENT LUSTER
D
ESCRIPTIONS
1. Tachometer
 Indicates the engine speed in revolutions per
minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer pointer
in the red area. Engine damage will occur.
2. Temperature Gauge
 The temperature gauge shows engine coolant
temperature. Any reading within the normal range
indicates that the engine cooling system is oper-
ating satisfactorily.
 The gauge pointer will likely indicate a higher
temperature when driving in hot weather, up
mountain grades, or when towing a trailer. It
should not be allowed to exceed the upper limits
of the normal operating range.
WARNING!
A hot engine cooling system is dangerous. You or others
could be badly burned by steam or boiling coolant. It is
recommended that you call an authorized dealer for
service if your vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could damage
your vehicle. If the temperature gauge reads "H" pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back into
the normal range. If the pointer remains on the "H",
turn the engine off immediately and call an authorized
dealer for service.
3. Instrument Cluster Display
 The instrument cluster display features a driver
interactive display page 113.
Ú
4. Fuel Gauge
 The pointer shows the level of fuel in the fuel tank
when the ignition switch is in the ON/RUN posi-
tion.
 The fuel pump symbol points to the
side of the vehicle where the fuel filler
door is located page 177.
Ú
5. Speedometer
 Indicates vehicle speed.