Table of Contents
Advertisement
Cable management arm (optional)
2076152-001
If necessary, the cable management arm can be removed when
moving the anesthesia system through narrow openings.
1.
Remove any monitoring cables from the cable management
arm.
2.
Lift up on the cable management arm by grasping near the
mounting post.
3.
When replacing the cable management arm, make sure the o-
ring and split bearing are in place on the mounting post and that
the mounting post is fully seated into the mounting hole after
insertion.
8 Setup and connections
8-29
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Carestation 620 and is the answer not in the manual?
Questions and answers
Where can I find instructions for cleaning the Giraffe beds? Specifically, I'd like to know which disinfectants are approved for the beds. We have a manual but it is several years old.