With Endwise Transport System Option; Converting From Transport To Field Mode (Without Optional Endwise Transport System) - MacDon R113 Operator's Manual

With Endwise Transport System Option

The mower conditioner is equipped with two bidirectional
amber lights (A) located on the outboard edges of the
carrier frame that function as flashing hazard lights and
turn signals.
The red lights (B) located on the inboard side of the
amber lights function as both tail and brake lights. Refer
to
3.8.4 Connecting Electrical Wiring Harness, page 50
for information about connecting the mower conditioner's
electrical harness to the tractor.
Amber reflective tape (C) is applied to various locations on
the front and sides of the mower conditioner, hitch, and
carrier frame. Red reflective tape (D) is applied to the rear
of the mower conditioner.
3.15.5 Converting from Transport to Field Mode (without Optional Endwise
Transport System)
DANGER
Engage brake, stop engine, and remove key from ignition before leaving operator's seat for any reason.
1. Stop engine and remove key from ignition.
2. Connect all hydraulic hoses (refer to
Hydraulics, page
wiring harness.
3. Open the steering lock-out valve by turning the handle
to the horizontal position.
169820
3.8.3 Connecting
and connect electrical
49),
OPERATION
Figure 3.70: Transport Lighting and Reflective
Tape Locations
Figure 3.71: Steering Lock-Out Valve in
Open Position
70
Revision A