Converting From Transport To Field Mode - With Road-Friendly Transport - MacDon R113 Installation Instructions Manual

5.5 Converting from Transport to Field Mode – With Road-Friendly
™ ™
Transport
DANGER
To prevent serious injury or death, do NOT convert the machine into, or from transport mode until all people, animals,
and objects are clear of the unit's rotational range.
CAUTION
To prevent equipment damage, ensure cutterbar doors are properly closed before converting the machine from field to
transport mode.
1. Clear bystanders from the area and start tractor. Do NOT operate the rotary disc pull-type.
2. Following the steps on transport-to-field decal (A), move
the transport switch to upper position (C) and ensure that
light (B) is NOT illuminated.
3. Open the steering lock-out valve and the two lift cylinder
lock-out valves by turning the handles to the open position.
214633
TRANSPORTING THE ROTARY DISC PULL-TYPE
56
Figure 5.17: Control Box
Figure 5.18: Hydraulic Lockout
B
A
C
Revision C