Angle Sensor System (Motor Lock); Angle Sensor Connection Inspection - Honda Fourtrax Rancher AT 2004 Service Manual

HONDAMATIC
24-20
7. TP Sensor Une Inspection Z
Turn the ignition switch OFF.
Disconnect the ECM 34P (Black) connector and
the TP sensor 3P (Black) connector.
Check for continuity on the Yellow/black wire
between the ECM connector and sensor connec-
tor.
ts there continuity?
NO - Open in wire between the ECM and TP
sensor
YES - GO TO STEP 8.
8. System Failure Reproduct ion
Connect aU connectors.
Turn the ignition switch ON.
Check the gear position indicator.
Is
the problem code blink indicated?
NO - . No problem (Temporary failure)
• Erase the problem code
YES - Faulty ECM - After replacement, per-
form initial sening procedu re
PROBLEM CODE 5: ANGLE SENSOR
SYSTEM (MOTOR LOCK)
1. Angl e Sensor Connection Inspection
Check for loose or poor contact on the ECM 34P
(Black) and SP (Black) connectors.
Check for loose or poor contact on the angle sen-
sor 3P (Black) connect or.
A
Y/ BI
~YI B ~
GEAR POSITION INDICATOR