Honda Fourtrax Rancher AT 2004 Service Manual page 301

Tighten the right pivot bolt to the specified torque
using a commercially available tool.
TORQUE: 4 N'm (0.4 kgf·m . 2.9 fbl·ft)
Move the swingarm up and down several times.
Retig hten the right pivot bolt to the specified torque
(see above) .
Install the right pivot Jock nut .
Tighten the right pivot lock nut t o the specified
torque using the special tool while holding the pivot
bolt.
TOOL:
Pivot adjusting wrench 07908-4690003
Refer to torque
TORQUE:
wrendJ readmg
information on page
15-3 'SERVICE
INFORMATION'
Actual : 118 N·m (12.0 kgf·m , 87 fbl·ft )
Indicated: 107 N·m (10.9 kgl·m , 79 fbl·ft l
Install the swingarm pivot caps each side.
Attach the swingarm boot to the swingarm and
tighten the boot band screw securely.
REAR WHEEL/SUSPENSION
15·13