Honda Fourtrax Rancher AT 2004 Service Manual page 183

Align the bolt holes in the head cover and rocker
arm shaft by turning the shaft.
Install the retaining bolts.
Tighten the rocker arm shaft retaining bolts.
INSTALLATION
CYLINDER HEADIV ALVEI CAMSHAFT
ROCKER ARM SHAFTS
Turn the crankshaft using the recoil stater knob and , - - - - - - - - - - - - - - - - - ,
align the "T" mark with the index notch on the alter- INDEX MARK
natar cover.
Make sure the piston is TDC
nop
Dead Cenler) on
the compression stroke. If not, turn the crankshaft
one full turn and match up the "T" mark again .
Install the dowel pins and new gasket.
T
"T" MARK
8-25