BRAKE SYSTEM
16-24
Remove the brake
cam
and felt seal.
Disconnect the breather hose from the brake panel.
Remove the brake panel nuts and discard them.
Remove the brake panel.
Remove the O-ring from the brake
panel
groove.
BRAKE PANEl
BEARING
REPLACEMENT
Turn the inner race of the bearing with your finger.
The bearing should turn smoothly and
q
uietly.
Also check thaI the outer race of
t
he bearing fils
tightly
in
the brake panel.
Replace
if
necessary.
Check the dust seal for wear or
damage.
Remove the axle dust seal and brake cam dust seal.