Honda Fourtrax Rancher AT 2004 Service Manual page 489

4. Control Motor line Inspection
Disconnect the ECM 5P (Black) connect or and
the control motor 2P (Natural) connector.
Check for continuity on the Green/red wire and
the Orange wire between the ECM connector
and main harness side motor connector .
Is there continuity?
NO
YES
- Open circuit in wire between
and control motor
- GO TO STEP 5.
5. Control M otor Circuit Inspection
the ECM
Disconnect the control motor 2P (Natural) con-
nector.
Check for continuity between the motor side
connector terminals.
Is there continuity?
NO - Faulty control motor
YES - GO TO STEP 6.
6. System Failure Reproduction
Connect al l connectors.
Turn the ignition switch ON.
Check the gear position indicator.
Is the problem code indicated?
NO - . No problem (Tempo rary failure)
• Erase the failure code
YES - Faulty ECM - Aher replacement, per-
form init ial setting procedure.
HONDAMATIC
GIR - - @ - GIR
O- @ - O
G
o
GEAR POSITION INDICATOR
®
@
<%l
.-.
....
sS]
~_
24-33