Honda Fourtrax Rancher AT 2004 Service Manual page 181

Install the cylinder head on the cylinder.
Install the four new sealing washers and cap nuts.
Install two new sealing washers and cylinder head
mounting bolts.
Apply oil to the cylinder head cap nut threads and
seating surfaces.
Tighten the cap nuts to the specified torque.
TORQUE: 39 N 'm (4.0 kgf·m. 29 IbHt)
Tighten the cylinder head mounting bolls securely.
Install the push rods.
Install the mounting rubbers on the upper engine
hanger bushing with the large O.D. side f acing in.
Install the upper engine hanger bracket and the
hanger bolt (frame side),
Install the upper engine hanger bolt (engine side).
Tighten the engine side hanger bracket bolts to the
specified torque.
TORQUE: 32 N·m (3.3 kgf·m , 24 Ibf·tt)
Tighten the frame side hanger bracket bolt to the
specified torque.
TORQUE: 54 N·m (5.5 kgf·m . 40 Ibf.ftl
Install a new O-ring into the carburetor insulator
groove.
CYLINDER HEADIV ALVEI CAMSHAFT
8-23