Flooded Engine; Bank Angle Sensor Ignition Cut-Off System - Honda TRX420FPM Owner's Manual

Starting & Stopping the Engine

Flooded Engine

If the engine fails to start after repeated attempts, it may be flooded with
excess fuel. To clear a flooded engine:
1. Leave the engine stop switch set to RUN (
2. Open the throttle fully.
3. Press the start button for 5 seconds (or operate the recoil starter
several times).
4. Follow the normal starting procedure.
5. If the engine starts, then open the throttle slightly if idling is unstable.
If the engine does not start, wait 10 seconds, then follow steps
−
1 4 again.
If the engine still won't start, refer to
Start, page 194

Bank Angle Sensor Ignition Cut-off System

Your vehicle's banking (lean angle) sensor system is designed to
automatically stop the engine if the vehicle is overturned.
Before restarting the engine, you must turn the ignition switch to the
OFF ( ) position and then back to ON (
restart until you perform this procedure.
Basic Operation & Riding
70
.
).
If Your Engine Quits or Won't
). The engine will not