Honda Fourtrax Rancher AT 2004 Service Manual page 165

Turn the crankshaft with the recoil starter and align
the "T" mark on the flywheel with the index mark on
the rear crankcase cover.
Remove the bolts and cylinder head cover.
Remove the dowel pins and gasket.
DISASSEMBLY
Remove the rocker arm shaft retaining bolts.
Push the rocker arm shah with the small screw-
driver through the bolt hole until the O-ring on the
shaft is removed out of the head cover.
CYLINDER HEADIVALVE/CAMSHAFT
INDEX MARK
"T" MARK
BOLTS
8-7