Honda Fourtrax Rancher AT 2004 Service Manual page 331

Install the brake drum cover and tighten the bolts
securely.
Apply molybdenum disulfide grease to the wheel
hub dust seal and axle splines.
Inst all wheel hub onto the rear axle.
Install the hub nut and t ighten it to the specified
torque.
TORQUE: 137 N ·m (14.0 kg f·m , 101 Ibf.ft)
Further tighten the hub nut until its grooves align
with the cotter pin hole in the axle shaft.
Install a new cotter pin and secure the hub nut.
Install the rear wheel (page 15-6).
Adjust the rear brake lever a nd pedal free play (page
4-18 ).
BRAKE PEDAL
REMOVAL
Remove the brake cables from the brake arm (page
16-23),
Disconnect the brake cable from the frame bracket.
Unhook the brake pedal return spring and brake
switch spring.
Remove the cotter pin and washer from the pedal
pivot shaft, then remove the brake pedal from the
shaft.
Unhook the brake cable from the brake pedal.
BRAKE SYSTEM
WHEEL HUB
\
WHEEL
COTTER PIN
16-29