Honda Fourtrax Rancher AT 2004 Service Manual page 221

Apply locking agent to the starter one-way clutch
bolt threads and install them.
Hold the flywheel with the special tool and tighten
the bolts to the specifi ed torque.
TOOL:
Flywheel ho lder
07725·0040000
or
equivalent commer-
cially available in
U.S.A.
TORQUE: 30 N ·m (3.1 kgf·m .
221bf.ftJ
Install the starter driven gear while turning it clock-
wise.
INSTALLATION
Install the woodruff key into t he key groove.
lubricate the needle bearing with molybdenum oil
solution.
Install the washer and bearing onto the crankshaft.
Clean any oil from the tapered ponion of the crank-
shaft and flywheel.
AL TERNATORISTARTER CLUTCH
n
iIiIiI
DRIVEN GEAR
11-15