Honda Fourtrax Rancher AT 2004 Service Manual page 344

FRONT DRIVING MECHANISM
Seepage 17-10{0(
Install a new boot band C and a new boot band B
band Installation
onto the inboard joint boot.
direction.
Bend down the band end and secure it with the lock __
tabs. Tap the lock tabs with a plastic hammer.
S'
BAN[) C
Be careful nor to
damage the
011
seal
in the differential
gearC8se.
17-12
Install a new boot band C and a new out board boot
band onto the outboard boot.
Bend down the band end and secure
it
with the lock
tabs. Tap the lock tabs with a plastic hammer.
INSTALLATION
Install a new stopper ring into the groove in the
inboard joint splines.
Install the drive shaft by holding the inboard joint
until the stopper ring seats in the groove of the dif·
ferential.
Make sure that the stopper ring is seated properly
by pulling on the inboard joint lightly.
~ BANDA
.....
TABS
TABS
fI
STOPPER RING