Honda Fourtrax Rancher AT 2004 Service Manual page 153

First tighten the left engine hanger bracket bolts
securely.
Tighten the left engine hanger bolt/nut to the speci-
fied torque.
TORQUE: 54 N 'm (5.5 kgf·m, 40 Ibf·ft )
Tighten the right engine hanger bolt/nut to the spec-
ified torque.
TORQUE: 54 N 'm (5.5 kgf·m, 40 Ibf·ft)
Tighten the upper engine hanger bolt (engine side)
to the specified torque.
TORQUE: 32 N 'm (3.3 kgf·m, 24 Ibf·ft)
Tighten the upper engine hanger bolt (frame side)
to the specified torque.
TORQUE: 54 N 'm (5.5 kgf·m, 40 Ibf·ft)
Apply molybdenum disulfide grease to a new 0-
ring and install it into the output shaft groove.
Connect the propeller shaft joint to the output shaft
of the engine.
ENGINE REMOVAL/INSTALLATION
BRACKET
7-9