Honda Fourtrax Rancher AT 2004 Service Manual page 217

The
cover {stator}
IS
magnetically
attached to the
fly-
wheel. be carellli
nollo gel anythmg
caugh/ between
these parts when
installing
Carefully install the alternator cover.
Install the wire clamps and bolts. then tighten the
alternator cover bolts.
Apply engine oil to a new oil seal and install it into
the alternator
cove r.
Install the starter driven pulley. aligning the bosses
with the grooves in the crankshaft.
Coat a new O-ring with engine oil and install it onto
the pulley bolt.
Apply engine o il to the pulley bolt threads and seat-
ing surfa ce, then install the bolt.
Hold the driven pulley with a screwd river and
tighten the bolt to the specified torque.
TOROUE: 10S N'm (11 .0 kgf·m, 80 lbf.ftl
AL TERNATORISTARTER CLUTCH
11-11