Honda Fourtrax Rancher AT 2004 Service Manual page 501

Remove the left engine side cover (page 7-4).
Remove the two mounting bolts, control motor and
mounting flange.
Coat a new O-ring with engine oil and install it into
the groove of the mounting flange.
Install the mounting flange to the front crankcase
cover.
HONDAMATIC
Coat a new O-ring with engine oil and install it into
,~~~~~~i;~~i~
the control motor groove.
Apply molybdenum oil solution to the motor shaft
splines and install the con t rol motor into the front
crankcase caver by aligning the bolt holes.
Install the mounting bolts and tighten them.
24-45