Cylinder Head Removal; Rocker Arm/Shaft - Honda Fourtrax Rancher AT 2004 Service Manual

CYLINDER HEADIV ALVEI CAMSHAFT
Remove the rocker arm shafts, lock washers and
rocker arms.
INSPECTION
ROCKER ARM f SHAFT
Check the (ocker arms and shafts for wear or dam-
age.
If the rocker arm follower is worn or damaged,
check the push rod and oi l passages.
Measure each rocker arm shaft 0 .0.
SERVICE LIMIT: 11 .92 mm (0.469 in)
Measure each rocker arm 1.0.
SERVICE LIMIT: 12.05
m m (0.474 in)
Subtract each rocker arm shaft 0.0. from the corre-
sponding rocker arm 1.0. to obtain the rocker arm-
to-shaft clearance.
SERV ICE LIMIT: 0.08 mm (0.003 in)
CYLINDER HEAD REMOVAL
8-8
Remove the following:
- carburetor (page 6-7)
- exhaust pipe (page 3-14)
- cylinder head cover (page 8-6)
Remove the bolts and carburetor insulator.
Remove the upper engine hanger bracket bolts
(engine side).
Remove the upper engine hanger bracket bolt
(frame side), mounting rubbers and the upper
engine hanger bracket.