Steering Shaft - Honda Fourtrax Rancher AT 2004 Service Manual

FRONT WHEEL/SUSPENSION/STEERING
STEERING SHAFT
REMOVAL
14-26
Remove the following:
- front wheels (page 14-12)
- front fender and inner fender (page 3-6)
- handle cover/combination meter (page 22· 12)
Remove the brake hose from the hose clamps.
Remove the wires and cables from the wire clamps.
Remove the handlebar lower holder nuts and wash -
ers, then remove the handlebar assembly from the
steering shaft.
Remove the cotter pins.
Remove the tie-rod ball joint nuts while holding the
joint stud flats with an open end wrench.
Remove the cotter pin from the steering shaft end .
Remove the shaft end nut, washer and steering
shaft arm.