Honda Fourtrax Rancher AT 2004 Service Manual page 493

6. Meter Line Inspection
Turn the ignition switch OFF.
Disconnect the ECM 34P (Black) connector and
the combination meter 14P (Gray) connector.
Check for continuity on each wires between the
ECM connector and main harness side meter
connector in the same wire color terminals.
Is there continuity?
NO - Open
;0
wire
between
the ECM
,nd
combination meter
YES - GO TO STEP 7.
7. Meter Line Short Circuit Inspection
Connect the ECM 34P (Black) connector.
Put the gear shift lever in the 0 range and the
mode select switch at ESP.
Turn the ignition switch ON.
Check for continuity between each of the wire
terminals of main harness side meter connector
and the frame ground.
Is there continuity
at
the Pink/ blue wire and
Light blue wire
only?
NO - Faulty combination meter
YES - Faulty ECM - After replacement, per-
form initial setting procedure.
HONDAMATIC
Y/O
Bu
BulIN
P/Bu
Bu
'j
Lb
P/ Bu
Y/O
BulIN
P/Bu
-~"1"rrlB, U=v'
Lb
Y/O
BulIN
24-37