3.7
Parameter Setting
Set the parameters of each channel.
Setting parameters here eliminates the need to program them.
When adding a new multiple input module, if selecting the module whose module model name has "(FX2N)"
at the end, it can be used as FX2N allocation mode.
• FX5-8AD: Normal mode
• FX5-8AD(FX2N): FX2N allocation mode
This section describes the case in a normal mode.
Basic setting
Setting procedure
1.
Open "Basic setting" of GX Works3.
[Navigation window] [Parameter] [Module information] Target module [Module Parameter] [Basic setting]
2.
Double-click the item to be changed to enter the setting value.
• Item where a value is selected from the pull-down
Click [] button of the item to be set, and from the pull-down list that appears, select the value.
• Item where a value is entered into the text box
Double-click the item to be set to enter the numeric value.
3 FX5-8AD
396
3.7 Parameter Setting