Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 175

CH1 Offset/gain setting mode
Specify the channel where the offset/gain setting is adjusted.
• Offset/gain setting mode (offset specification): Channel to adjust the offset
• Offset/gain setting mode (gain specification): Channel to adjust the gain
Setting
0
1
Set one of the offset specification or gain specification to the Setting channel (1), and the other to Disable (0). Setting a value
other than 0 and 1 causes an offset/gain setting channel range error (error code: 1E8H).
Multiple channels can be set at the same time. In that case, set the offset specification and gain specification separately. The
offset specification and gain specification cannot be set at the same time.
In the following cases, an offset/gain setting channel specification error (error code: 1E50H) occurs.
• When both the offset specification and gain specification of the same channel are set to Setting channel (1)
• When both the offset specification and gain specification of the same channel are set to Disable (0)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Offset/gain setting mode (offset
specification)
CH Offset/gain setting mode (gain
specification)
CH Offset/gain setting mode (offset
specification) (in FX3 allocation mode function)
CH Offset/gain setting mode (gain
specification) (In FX3 allocation mode function)
■Enabling the setting
Turn offon 'Channel change request' (Un\G70, b11).
■Default value
The default value is Disable (0) for all the channels.
Setting content
Disable
Setting channel
CH1 CH2
4132 4134
4133 4135
4131 4132
4141 4142
CH3 CH4
4136 4138
4137 4139
4133 4134
4143 4144
Appendix 4 Buffer Memory Areas
A
APPX
173