Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 253

To delete it, move the mouse pointer to the terminal point and select "Delete End Point" from the right-click menu. Once the
mouse pointer moves to the terminal point, its displayed shape changes to
4.
Set the wave between terminal points in the right-click menu or "Wave Specification" in "Wave Detail Setting".
Item Setting result
Circular arc The start and end points are drawn by an arc. When an arc is to be selected, its orientation can be inverted by setting it in "Orientation" The
drawn arc is processed according to the following procedure.
The arc to be drawn
Start point
Set "Direction".
Line The start and end points are drawn by a line.
Exponential The start and end points are drawn by expanding or contracting the graph so that they will be the terminal points of the graph of exponential
x
function function y = e (X = 0 to 10).
.
Deleted end point
End point
1) Construct an equilateral triangle having the start and end points
as its vertices.
2) Construct a circle having the other vertex of the triangle as its
center and a side of the triangle as its radius.
3) Draw the minor arc connecting the start and end points on the
wave graph.
* The steps 1) and 2) are processed inside GX Works3, and not
displayed on the wave graph.
In an upward direction In a downward direction
2 FX5-4DA
2.7 Parameter Settings
2
251