Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 477

CH1 Conversion setting at disconnection detection
Set what value is to be stored in 'CH1 Digital output value' (Un\G400) at the time of disconnection detection.
For details on the disconnection detection function, refer to the following.
Page 368 Disconnection detection function
Setting value
0
1
2
3
Setting a value other than the above results in operation with Downscale (1).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Conversion setting at disconnection detection
CH Conversion setting at disconnection detection (In FX2N
allocation mode function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Downscale (1).
CH1 Logging enable/disable setting
Set whether to enable or disable the logging function.
For details on the logging function, refer to the following.
Page 371 Logging function
Setting value
0
1
Setting a value other than the above causes a logging enable/disable setting range error (error code: 1D0H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Logging enable/disable setting
CH Logging enable/disable setting (In FX2N allocation mode
function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (1).
Setting content
Upscale
Downscale
Any value
Value just before disconnection
CH1 CH2 CH3 CH4
534 734 934 1134
1271 1272 1273 1274
Setting content
Enable
Disable
CH1 CH2 CH3 CH4
535 735 935 1135
9161 9162 9163 9164
CH5 CH6 CH7
1334 1534 1734
1275 1276 1277
CH5 CH6 CH7
1335 1535 1735
9165 9166 9167
APPX
Appendix 12 Buffer Memory Areas
CH8
1934
1278
A
CH8
1935
9168
475