2.9
Programming
This section describes the programming procedure and the basic program of an analog output module.
Programming procedure
Take the following steps to create a program for running an analog output module:
1.
Set parameters.
2.
Create a program.
In the normal output mode
■System configuration
The following shows a system configuration example.
(1)
(1) CPU module (FX5U CPU module)
(2) Analog output module (FX5-4DA)
■Parameter settings
Perform an initial setting in the module parameter of GX Works3. The refresh settings do not need to be changed here.
• Module parameters
[Basic setting]
(2)
2
2 FX5-4DA
259
2.9 Programming