Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 158

CH1 Digital clipping enable/disable setting
Set whether to enable or disable the digital clipping function.
For details on the digital clipping function, refer to the following.
Page 39 Digital clipping function
Setting value
0
1
If a value other than the above is set, a digital clipping enable/disable setting range error (error code: 1A5H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Digital clipping enable/disable setting
CH Digital clipping enable/disable setting (In
FX3 allocation mode function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (1) for all the channels.
CH1 Alert output setting (Process alarm)
Set whether to enable or disable the alert output of the process alarm.
For details on the alert output function, refer to the following.
Page 46 Alert output function
Setting value
0
1
Setting a value other than the above causes an alert output setting (Process alarm) range error (error code: 1B0H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Alert output setting (Process alarm)
CH Alert output setting (Process alarm) (In
FX3 allocation mode function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (1) for all channels.
APPX
156
Appendix 4 Buffer Memory Areas
Setting content
Enable
Disable
CH1 CH2
510 710
1141 1142
Setting content
Enable
Disable
CH1 CH2
512 712
1181 1182
CH3 CH4
910 1110
1143 1144
CH3 CH4
912 1112
1183 1184