Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 252

■Register the wave pattern
Using the wave output data creation tool, create and register a wave pattern.
1.
Select a graph from "Register wave pattern", and press the Enter key on the keyboard. The "Register wave pattern"
window is displayed.
2.
Set "Wave pattern information".
Item
Wave pattern No.
Wave pattern name
Digital value range
Number of pieces of data
Comment
3.
Click any position on the wave graph to create the terminal point. Each created terminal points is indicated by
2 FX5-4DA
250
2.7 Parameter Settings
Description
The wave pattern No. selected on the "Create Wave Data". Up to 10 wave
patterns can be created.
Set "Wave pattern name".
Select the digital value setting range. Select it according to the output range to
be used.
Set the wave data points of the wave pattern.
Set a comment on the wave pattern.
Created end point
Setting range

8 two-byte characters (16 one-byte
characters)
• 0 to 32000 (default value)
• -32000 to +32000
1 to 80000 (default value: 100)
32 two-byte characters (64 one-byte
characters)
.