Setting procedure
1.
When adding a new module, select the module whose module model name has "(FX3)" at the end.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
2.
Configure the same parameter setting as the one of when the Normal mode is used.
3.
After writing the module parameter, turn offon or reset the CPU module.
Switching between normal mode and FX3 allocation mode is not possible during operation.
1.5
System Configuration
The following shows a system configuration using the analog input module.
• System configuration example
(1)
(1) FX5 CPU module
(2) Analog input module (FX5-4AD)
(3) Analog device connection cable
(4) Current sensor
(5) Voltage sensor
(2)
(3)
(4)
(3)
(5)
1 FX5-4AD
1.5 System Configuration
1
83