Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 160

CH1 Process alarm upper lower limit value
Set an upper lower limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.
Page 46 Alert output function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Process alarm upper lower limit value
CH Process alarm upper lower limit value (in
FX3 allocation mode function)
■Setting range
The possible setting range is from -32768 to +32767.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is 0 for all channels.
CH1 Process alarm lower upper limit value
Set a lower upper limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.
Page 46 Alert output function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Process alarm lower upper limit value
CH Process alarm lower upper limit value (in
FX3 allocation mode function)
■Setting range
The possible setting range is from -32768 to +32767.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is 0 for all channels.
APPX
158
Appendix 4 Buffer Memory Areas
CH1 CH2
516 716
1191 1192
CH1 CH2
518 718
1201 1202
CH3 CH4
916 1116
1193 1194
CH3 CH4
918 1118
1203 1204