Procedures Before Operation; Functions - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

1.3

Procedures Before Operation

This section describes the procedures before operation.
1.
Check the analog input module specifications
Check the analog input module specifications. (Page 18 Specifications)
2.
Install the analog input module
Install the analog input module to the CPU module. For details, refer to the following.
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Wiring
Perform wiring of external devices to the analog input module.
4.
Adding a module
Add an analog input module to the module configuration by using GX Works3.
When adding a new analog input module, if selecting the module whose module model name has "(FX3)" at
the end, it can be used as FX3 allocation mode.
• FX5-4AD: Normal mode
• FX5-4AD(FX3): FX3 allocation mode
For details on the FX3 allocation mode function, refer to Page 82 FX3 allocation mode function
5.
Parameter settings
Set parameters of the analog input module by using GX Works3. (Page 88 Parameter Settings)
6.
Offset/gain setting
When setting the user range, perform the offset/gain setting.
7.
Programming
Create a program.
1.4

Functions

This section describes the functions of an analog input module and the setting procedures for those functions.
For details on the buffer memory areas, refer to the following.
Page 111 Buffer Memory Areas
• This section describes buffer memory addresses for CH1. For details on the buffer memory addresses after
CH2, refer to the following.
Page 111 List of buffer memory areas
• Numerical values corresponding to the channel where an error has occurred and the error description fit in
the  and  of an error code and alarm code described in this section. For details on the numerical values,
refer to the following.
Page 103 List of error codes
Page 106 List of alarm codes
1 FX5-4AD
24
1.3 Procedures Before Operation