Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 131

A/D conversion completed flag
The A/D conversion status can be checked.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0 0 0
(2)
(1) 0: During A/D conversion or unused, 1: A/D conversion completed
(2) The values of b4 to b15 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
A/D conversion completed flag
A/D conversion completed flag (in FX3
allocation mode function)
■A/D conversion completed flag status
When the first A/D conversion is completed in the channel where the A/D conversion is enabled, the flag turns to A/D
conversion completed (1). 'A/D conversion completed flag' (Un\G69, b14) turns on when the conversion of all the channels
where the A/D conversion is enabled is completed.
■Clearing A/D conversion completed flag
Turning offonoff 'Operating condition setting request' (Un\G70, b9) turns the flag back to the default (During A/D
conversion or unused (0)), and when the first A/D conversion has completed, the flag turns to A/D conversion completed (1)
again.
Operation mode monitor
The operation mode status in operation can be checked.
Monitor value
0
1
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Operation mode monitor
Operation mode monitor (In FX3 allocation
mode function)
b8 b7 b6 b5 b4 b3 b2
0 0 0 0 0 CH4 CH3 CH2
(1)
CH1
42
124
Description
Normal mode
Offset/gain setting mode
CH1
60
3160
b1 b0
CH1
CH2 CH3
CH2 CH3
CH4
CH4
APPX
Appendix 4 Buffer Memory Areas
A
129