Ipv6 Settings - VTech ET685 Administrator And Provisioning Manual

3. Press and hold

IPv6 Settings

NOTE: After changing these settings, you must reboot your phone.
1. Press
2. Select 1 IPv6 until the slider is on
3. Select 2 Protocol.
4. Select 1 DHCP & SLAAC to assign the IP address with DHCPv6 and SLAAC
(Stateless Address AutoConfiguration).
–OR–
Select 2 SLAAC to assign the IP address with SLAAC only.
5. Press and hold
Phone Menu Reference
ET685 Administrator and Provisioning Manual
for two seconds to return to the idle screen.
> 4 Network > 1 IP Settings > 2 IPv6.
for two seconds to return to the idle screen.
66
and "On" is displayed.
Back to Contents