VTech ET685 Administrator And Provisioning Manual page 422

The firmware upgrade or configuration update isn't working.
Before using the WebUI, ensure you have the latest version of your web browser

installed. Some menus and controls in older browsers may operate differently than
described in this manual.
Ensure you have specified the correct path to the firmware and configuration files

on the WebUI: Software Update page and the Advanced > Update page.
Provisioning: Use DHCP Option is enabled, but the ET685 is not getting a
provisioning URL from the DHCP Server.
Ensure that DHCP is set to "on" in the WebUI: Advanced > Network .

Pages are not received.
The Intercom Policy setting is set to "off". Check this setting in the WebUI:

Advanced > Behavior.
Troubleshooting
ET685 Administrator and Provisioning Manual
422
Back to Contents