VTech ET685 Administrator And Provisioning Manual page 190

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
This setting is accessible when the phone is running in administrator
(admin) mode. The default administrator password (admin PW) is "0000".
When the phone is running in user mode (that is, many settings are not
available), you need the admin PW to switch the phone to admin mode.
This setting requires confirmation. See parameter
admin_mode_password_confirm.
Note: VTech recommends that you replace the default admin PW by an
individual one. If you do not, an unauthorized third party with access to
the phone could set an admin PW unknown to you. In such a case, you
would no longer be able to switch from user mode to administrator mode.
If you set your own admin PW, be sure to write it down and store it in a
secure place. If you lose your admin PW, you will not be able to return the
phone to admin mode without a factory reset of all values.
Valid values:
1. Numbers of unspecified length. For example: 1234
2. Character strings of unspecified length. For example: nhcndeve
3. Special characters of unspecified length:
. + @ : , ? ! - _ / ( ) ; & $ * # < > [ ] =
4. A mixture of 1), 2), 3) of unspecified length
String
blank
admin_mode_password_confirm
This setting is required to confirm the admin password set at paremater
admin_mode_password to make sure that you have not made any
typing errors when entering the password.
Valid values:
1. Numbers of unspecified length. For example: 1234
2. Character strings of unspecified length. For example: nhcndeve
3. Special characters of unspecified length:
. + @ : , ? ! - _ / ( ) ; & $ * # < > [ ] =
4. A mixture of 1), 2), 3) of unspecified length
String
blank
190
Back to Contents