VTech ET685 Administrator And Provisioning Manual page 144

Setting
IPv6:
DHCP(v6):
IP address(v6):
DNS:
Domain(v6):
DNS Server 1(v6):
DNS Server 2(v6):
DNS Server 3(v6):
DNS Server 4(v6):
Time:
NTP Time Server(v6):
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
This setting enables the use of ICMPv6 or DHCPv6 for
inquiring IPv6 addresses. Currently this is the only way of
assigning IPv6 addresses to your VTech phone. Setting up
static IPv6 addresses is currently not supported. IPv6
address changes during operation cannot handled
dynamically at the moment. Thus a restart of the phone is
needed in order to use the new IPv6 address properly.
This setting holds the current IPv6 address of the device.
Note: Setting up static IPv6 addresses is currently not
supported. See also dhcp_v6.
Additional domain name for IPv6 networks. See also
dns_domain.
Additional DNS server for IPv6. See also DNS Server1.
Additional DNS server for IPv6. See also DNS Server1.
Additional DNS server for IPv6. See also DNS Server1.
Additional DNS server for IPv6. See also DNS Server1.
Addtional NTP server for IPv6. Used only if ntp_server is
empty.
144
Back to Contents