VTech ET685 Administrator And Provisioning Manual page 214

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
This setting applies only to the UC edition. It is used to store the HTTP
address of the certificate provisioning service provided in option 43 of the
DHCP response. The phone will query for this information on start-up by
broadcastig a DHCP INFORM message with the vendor class identifier
(option 60) set to "MS-UC-Client" (UC edition only). This setting may be
provisioned manually if the phone is in an environment where the DHCP
server does not provide this information, however if the server response
does contain the requested information, the setting will be overwritten.
Without this setting sign-in with extension number and PIN is not possible.
HTTP URI
blank
challenge_checksync
Turning this setting on enables challenge responses for Check-Sync
requests.
on, off
off
challenge_reboot
This setting enables and disables challenge responses for remote reboot
requests.
on, off
off
challenge_response
VTech phones can handle challenge responses on the phone. Turning this
setting off will disable this feature and you will only be able to handle
authentication through the web interface of the phone.
on, off
on
chars_in_lower_case
214
Back to Contents